TorqueFlite 727 Transmission Rebuild in Glendale, AZ

Sun West Transmissions — Glendale, AZ. The TorqueFlite 727 is the legendary three-speed automatic behind Hemi and big-block Mopars, Dodge trucks and plenty of AMC and Jeep vehicles. Whether you are restoring a classic or building for the strip, we rebuild the 727 to match how you drive.

A Short History of the 727

Chrysler introduced the A727 in 1962 with a one-piece aluminum case, replacing the earlier cast-iron TorqueFlite. It became the heavy-duty partner to the smaller A904 and went behind Chrysler’s biggest engines for decades. AMC adopted the TorqueFlite in the early 1970s under the Torque-Command name, and full-size Jeeps used the 727 as well. Later versions carried the 36RH and 37RH names, and the four-speed A518 that arrived in 1990 was built on the 727 design with an overdrive unit added.

TorqueFlite 727 at a glanceDetails
TypeThree-speed automatic with torque converter
CaseOne-piece aluminum
Gear ratios2.45 first, 1.45 second, 1.00 third; 2.20 reverse
Apply devicesFront and rear clutches, kickdown band, low-reverse band and an overrunning clutch
Introduced1962
Later names36RH and 37RH
Overdrive descendantA518 (46RH/46RE) from 1990

Bellhousing patterns, output shafts and tail housings vary between Chrysler, AMC, Jeep and truck versions, so we identify exactly what you have before ordering parts.

Why Builders Still Choose the 727

The 727 is strong, simple and easy to work on. Its hydraulic controls do not need a computer, parts are widely available, and it responds well to upgrades. That is why it remains popular in drag racing, off-roading and even monster trucks, long after Chrysler stopped building it.

Common 727 Problems

Stock Rebuild or Performance Build?

For a restoration or weekend cruiser, a quality stock rebuild keeps the factory shift feel and runs for years. For more power, sticky tires or racing, a performance build adds clutch capacity, upgraded parts, recalibrated valve body work for firmer shifts and a torque converter matched to your camshaft, rear gear and tire size.

Tell us how the car is really used: street, strip or trail. That shapes every choice in the build. Our performance transmission builds page explains our approach in more detail.

Arizona Heat and Classic Mopars

A 727 in an older car often has a small factory cooler, a tired radiator and fluid that has not been changed in years. Add a summer cruise night or a hot afternoon in traffic, and temperatures climb quickly. A transmission cooler is a smart addition to almost any 727, especially with a high-stall converter. Regular fluid and filter service, with the bands adjusted when needed, helps it last.

How Sun West Rebuilds the 727

We start with a free inspection and road test when the car runs. On the bench, the transmission is completely disassembled, cleaned and inspected. New clutches, steels, bands, seals, gaskets, filter and bushings go in. We check the drums, planetary gear sets, overrunning clutch, pump and valve body, and replace worn hard parts. After reinstallation, the bands and linkage are adjusted and the car is road tested.

Rebuilding your original unit keeps the case that came with your car, which matters to many restorers. Qualifying rebuilds on non-modified vehicles include our 3-year / 40,000-mile warranty; racing and heavily modified builds may be covered differently, and we explain that before work starts.

TorqueFlite 727 Rebuild Prices

Current Sun West prices for Dodge and Chrysler transmissions are on our price pages.

Or call (623) 473-9800 for a free quote.

TorqueFlite 727 FAQ

What is the difference between a 727 and a 904?

The 727 is the larger, heavier-duty TorqueFlite built for big engines and trucks. The 904 is the compact version used behind smaller engines. They share a similar layout but very few parts.

Can I add overdrive to a 727-equipped car?

The A518 is essentially a 727 with an overdrive unit, and some builders swap one in. It requires changes to the driveshaft, crossmember and controls. Call us to talk through your project, and see our A518 / 46RE page for more on that unit.

What fluid should a rebuilt 727 use?

Fluid recommendations changed over the years. Check the service manual for your vehicle, or ask us what we recommend for your rebuild.

Is a 727 that has been sitting for years worth rebuilding?

Usually, yes. Long storage hardens seals and can leave varnish in the valve body, but the drums, gears and case are often in good shape. A rebuild replaces the soft parts and flushes out the old fluid, so a long-parked 727 can be made dependable again.

Bring Your Mopar to Sun West

6116 W Northern Ave, Glendale, AZ 85301
Mon–Fri 7:30 am–5:30 pm · Sat 8:00 am–4:00 pm
Phone: (623) 473-9800

From numbers-matching muscle cars to work trucks and Jeeps, we will inspect your 727 and give you a free estimate before any work begins. Financing is available.